KUHN AXERA-M, Operator'S Manual

Page: 34 / 46

34
Photo 8
10. Gearbox position control
♦
Remove the discs.
♦
The distance from the top of the hub to the underside of the hopper floor (Photo 9;
No.3) must be 11.8 cm.
♦
Replace the synthetic disc hub nut (Photo 9; No.1).
♦
Place the M6 x 70 bolt (Photo 9; No.2) (V) through the small hole in the hopper
floor (Photo 9; No.3)
♦
When in output point position 7, the bolt tip must align exactly with the middle
point of the synthetic disc hub nut (Photo 9; No.1).
Photo 9