KUHN AXERA-M, Operator'S Manual

Page: 20 / 46

20
3.2 Setting the application rate
There are two shutter slides per hopper outlet. The open/close shutter slides (Photo 3,
No.5) only move hydraulically to a fully opened or a fully closed position.
Photo 3
The hand operated metering slides (Photo 4, No.6) control the application rate with
the aid of a fine graded flow rate quandrant (Photo 4, No.7) and indicator (Photo 4,
No.8). When the application rate is selected in accordance with the spreading
charts/calibration test, position the metering slides (Photo 4, No.6) in the same place
on both sides by firmly locking the handlock nut (Photo 4, No.9) in place.
Photo 4