KUHL AXIS H 30.1 EMC, Operator'S Manual

Page: 46 / 136

Before operation 7
38
Mounting instructions:
The machine can be connected to the tractor with class III linkage only with
class II clearance and the use of reducing sleeves.
The bottom and top linkage pins must be locked with the locking pins or spring
clips.
The solid fertiliser broadcaster must be mounted as specified in the calibra-
tion charts for correct cross distribution of the fertiliser.
To avoid a seesawing motion during operation, make sure that the solid ferti-
liser broadcaster does not have too much sideways play:
- Lower steering arms of the tractor should be braced by stabilising struts
or chains.
1. Start the tractor.
2. Approach the solid fertiliser broadcaster with the tractor.
Do not latch the lower steering arm hooks into place yet.
Make sure there is enough space between the tractor and the solid ferti-
liser broadcaster to be able to connect the drive shaft and control ele-
ments.
3. Turn off the tractor. Remove the ignition key.
Hydraulic system with constant flow pump
Hydraulic system with regulating pump without external load sensing connec-
tion
Hydraulic system with regulating pump with external load sensing connection
Figure 7.2: Connection lines, solid fertiliser broadcaster
[1] Free backflow
[2] Pressure line
[3] LS pipe
[4] ISOBUS device connector
[5] Light cable
NOTICE
The solid fertiliser broadcaster can be connected to different hydraulic systems.
1 2 3 4 5