//
ORIGINAL OPERATING INSTRUCTIONS
Commissioning
25.04.2019
34/54
6
Measure spreading width.
If there is a difference compared to the set spreading width (in this example: 4,0 m),
this difference shall be corrected as follows:
1
Turn pressure regulator
for rough correction: (1, 2,
3, ............, 10) x 1 imp./m
2
Repeat step 3 - 6 (see above).
Fine correction:
3
Switch off control system.
4
Start setup menu (see Chapter
7.2 "Start/finish setup menu", page 25
).
5
Actuate several times.
➯
6
Fine correction by pressing
[Imp/m].
