//
ORIGINAL OPERATING INSTRUCTIONS
Commissioning
25.04.2019
23/54
7.1
Wiring diagram
Pos. no.
Component
10
Connecting cable from operating unit (Pos. 30) to slave (Pos. 40).
20
Drive signal / power supply from carrier vehicle to operating unit (Pos. 30).
30
Operating unit of control unit k-basic 2.
40
Slave of k-basic 2 control system within the spreader.
1
Fit operating unit (Pos. 30) at appropriate place in the carrier vehicle.
2
Take out drive signal and power supply from carrier vehicle (Pos. 20) and connect
with operating unit (Pos. 30).
Alternatively, connect directly with the slave (Pos. 40) in the spreader.
3
Plug in data cable (Pos. 10) at the rear of the operating unit (Pos. 30). Pay
attention to the marked protrusion.
For exact wiring diagrams, please see the spare parts list.
