Kudo3D Titan 1 - Build Manual
Ver. 1.1
24
of
33
III. Leveling the Printer
1.
Move the printer to a stable surface that is close to a power outlet.
Note
: The printer should be re-leveled every time it is moved.
Leveling the Frame
2.
Place the bubble level on top of the steel plate on the printer box and adjust the four leveling feet to make
sure the two bubbles are in the middle.
Leveling the Resin Container
3.
Carefully place the bubble level in the resin container to confirm that it is still level.
Note
: The surface of the resin container is very delicate. Do not scratch the surface. Use the brush or dust
blower to remove particulates.
Leveling the Projector
4. Place the bubble level on top of the projector to confirm it is level. Adjust the projector mount with the
3mm
T-ball Headed Allen wrench (Orange handle)
,if necessary.
