Kudo3D Titan 1 - Build Manual
Ver. 1.1
18
of
33
3. Connect the white RS232 cable, the right-angled power chord, and the black HDMI cable to the projector
before mounting it into place.
4.
Carefully place the projector in the printer box so the 3 hex screws (
M3x14mm
) align with the projector
mountings and use the
2.5mm L-shaped Allen Wrench
to screw the projector into position (Do Not over
tighten the hex screws).
Note
: Make sure the hex screws are in the middle of the slot.
