Kuda MOTOR6, Instruction Manual

Page: 37 / 82

37
Operation
Stopping boat
WARNING
Do not use the reverse function to slow
down or stop the boat as it could cause you
to lose control, be ejected, or impact the load
or other parts of the boat. This could
increase the risk of serious injury. It could also
damage the shift mechanism.
The boat is not equipped with a separate
braking system. Water resistance stops it after the
throttle lever is moved back to idle. The stopping
distance varies depending on gross weight, water
surface conditions, and wind direction.
3
1
2
1. Engine shut-off switch
2. Cord
3. Clip
2. Tighten the air vent screw on the fuel tank cap.
Stopping engine
Before stopping the engine, first let it cool off for
a few minutes at idle or low speed. Stopping the
engine immediately after operating at high speed
is not recommended.
Procedure
1.
Push and hold the engine stop button until
the engine stops completely. The engine can
also be stopped by pulling the engine shut-off
cord and removing the clip from the engine
shut-off switch
.
1. Engine stop button
3. Align the fuel cock in the closed position.
1
1
1. Air vent screw
1. Air vent screw