Assembly instruction
42
stirring device and sieve
assembly (accessories)
The accessories stirring device and sieve are always supplied
together with the machine.
Always mount the sieve on top of the stirring device.
The sieve will prevent direct contact with the strongly moving stirring
device.
Leaving the sieve out can lead to serious injury.
N
OTE
: VS 220-330 has its own stirring device which is different from the
other types!
stirring device assembly
Place the stirrer on the agitator and secure it with the spring.
See paragraph »Assembly of the stirring device and the sieve«
on page 58.
Then mount the sieve.
VS 220-330 sieve assembly
3 longer bolts are supplied for assembly of the sieve in the hopper.
Remove the upper bolt from the middle of the hopper support plate
left and right.
Place the longer bolts and washers from the inside into the holes
that have become open.
Unscrew the nuts on the bolt.
Place the sieve with the slot holes behind the washers and bolt
heads.
Mark the place where the extra hole should be drilled.
Remove the sieve and drill the 7/16” hole.
Place the third bolt and washer and the nut loose on the bolt.
Place the sieve with the slot holes behind the three bolt heads.
Fasten the nuts on 11 ft.lbs.
Replace the 2 bolts with longer ones
