To be done before spreading
73
To be done before spreading
Online spreading chart
service
Setting dosing via the Internet
Information about the settings for the spreader can be found in the
spreading chart decal, as well as on the online spreading chart
service. This will also provide information about additional types of
fertiliser that have been tested recently.
You enter the working width, application rate, driving speed and type
of fertilisation. The website will provide instructions on the settings of
the spreader for your type of fertiliser.
Setting the dosing without the website
Do you not have an Internet connection?
Follow the steps as described in:
»Finding the correct setting for your spreading work« on page
Methods for setting the spreader can be found at:
chapter »Setting the spreader« on page 82.
Make sure you check the instructions given on the online spreading
chart service. Do a calibration test to check the dosing setting. Then
check the spreading pattern with a tray test.
See paragraph »Calibration test« on page 93 and
paragraph »Check the spreading pattern (tray test)« on page 96.
Spreading charts
website
You can reach the spreading chart service as follows:
Go to the spreading charts website:
http://www.kubotaspreadingcharts.com
Language and unit
selection
At the top right of the page you will find the option for your language
and units.
Choose your language.
•
English (imperial) shows the units according to the imperial
system.
•
All the other languages show the metric units.
Machine group option
On the page you will further find the machine menu.
Select the link to the Superflow PS.
The option is displayed.
Push the button to confirm your option and to continue.
Now appears a screen with important instructions.
Read this information carefully.
Confirm that you agree with what is not shown.
The spreading charts service starts and displays the screen
