12. Main gear shift lever
WARNING
To avoid personal injury or death:
• Before moving the main gear shift lever (1
2
3
4), make sure the pilot lamp is on. If
the pilot lamp fails to come on, stop the tractor
completely and start the gear shifting all over.
• Do not shift between [Ls] and [Hs] on a downhill
slope. The shifting may fail. Be sure to do the
shifting before going downhill.
8 speeds can be selected with the main gear shift lever.
The main gear shift is fully synchronized to shift without
stopping.
IMPORTANT :
• The main gear shift may be shifted between
speeds on-the-go, but the clutch must be
depressed.
Shifting between [Ls] and [Hs]
1. Keep the engine running and the main gear shift
lever at
“neutral”
. Move the lever against the left-
side face, and the speed changes each time
between
[Ls]
and
[Hs]
. Be sure to use the clutch
while shifting.
2. The pilot lamps (low) and (high) indicate that the
shift is changed between
[Ls]
and
[Hs]
.
3. The buzzer sounds when the shifting is underway
with both the pilot lamps (low) and (high) off.
13. Range gear shift lever
The range gear shift can only be shifted when the
tractor is completely stopped and the clutch is
depressed.
IMPORTANT :
• To avoid transmission damage, depress clutch
pedal and stop the tractor before shifting
between ranges.
14. Hydraulic-shuttle shift lever
Raise up and shift the shuttle shift lever forward to
obtain forward speeds and shift back to obtain reverse
speeds. This shifting does not require clutch operation.
IMPORTANT :
• The hydraulic-shuttle shift lever may be shifted
while the tractor is moving slowly.
NOTE :
• While the shuttle shift lever is at the
“NEUTRAL” position, the [N] character appears
on the LCD monitor.
(1) “NEUTRAL”
15. Dual speed shift switch (dual
speed model)
The
dual speed
shift switch can be operated when the
tractor is traveling without using the clutch.
This switch affects tractor travel speed change by about
19%.
“LO”
speed and
“HI”
speed switch back and forth
each time this switch is pushed.
Dual speed indicator
The indicator comes on when the
dual speed
switch is
set to
“LO”
.
The indicator goes off when the
dual speed
switch is
set to
“HI”
.
(1) Dual speed shift switch
(2) Dual speed indicator
(A) “LO”
(B) “HI”
16. Clutch-off switch
WARNING
To avoid personal injury or death:
• If you release the clutch-off switch when the
travel speed is selected, the clutch becomes
engaged and the tractor will begin to move.
• Always use the clutch pedal to start the tractor.
STARTING THE TRACTOR
OPERATING THE TRACTOR
M6S-111,M6L-111,M6H-101
81
Summary of Contents for M6H-101
