Kubota M6H-101, Operator'S Manual

Page: 132 / 202

2. Rear wheels
Rear tread width can be adjusted, as shown, with the
standard equipped tires.
To change the tread width:
1. Remove the wheel rim and/or disc mounting bolts.
2. Change the position of the rim and/or disc (right
and left) to the desired position, and tighten the
bolts.
IMPORTANT :
• Always attach wheels as shown in the drawing.
• If not attached as illustrated, transmission parts
may be damaged.
• When re-fitting or adjusting a wheel, tighten the
bolts to the following torques then recheck after
driving the tractor 200 m (200 yards) and 10
times of shuttle movement by 5 m (5 yards), and
thereafter according to service interval.
(See MAINTENANCE on page 137.)
(1) 368 to 402 N ⋅ m / 37.6 to 40.9 kgf ⋅ m / 272 to 296 ft ⋅ lbs
16.9-24
1620 mm
(63.8 in.)
1690 mm
(66.5 in.)
1800 mm
(70.9 in.)
1890 mm
(74.4 in.)
2000 mm
(78.7 in.)
18.4-26 ---
680 mm
(66.1 in.)
1790 mm
(70.5 in.)
1890 mm
(74.4 in.)
1990 mm
(78.3 in.)
(1) Tread
(2) Rear wheel rim
(3) Rear wheel disc
(Continued)
600/50-22.5
1840 mm
(72.4 in.)
(1) Tread
TIRES, WHEELS, AND BALLAST (M6L-111) WHEEL ADJUSTMENT
126
M6S-111,M6L-111,M6H-101