1.1 Front jack point
WARNING
To avoid personal injury or death:
• Before jacking up the tractor, park it on a firm
and level ground and chock the rear wheels.
• Fix the front axle to keep it from pivoting.
• Select jacks that withstand the machine weight
and set them up as follows.
(1) Jack point
2. Adjusting front wheel turning
stopper bolt
Take the following steps to adjust the turning angle with
the stopper.
1. Slightly tighten the stopper bolt.
2. Start the engine. In order to, position the stopper's
contact face, turn the steering wheel to the right and
left to get the stopper two or three times into contact
with the bevel gear case.
3. Hold the stopper with an adjustable wrench to
prevent it from getting out of position.
4. Tighten the stopper bolt to the specified torque.
IMPORTANT :
• The turning angle varies depending on the
presence or absence of the front weight
bumper as well as the tire size and tread
setting. Adjust the stopper bolt with these
factors in mind.
• Make sure that the stopper bolts are always
tightened to the correct torque.
(1) Stopper bolts
(A) “FRONT”
Stopper bolts adjustment (ex. LH stop-
per bolt)
Tread
2025 mm (79.7 in.)
1925 mm (75.8 in.)
1830 mm (72 in.)
Stopper
Tread
1665 mm (65.6 in.)
1565 mm (61.6 in.)
Stopper
(Factory setting)
(1) M14 x 1.5 bolt
(2) 17 mm
(3) 3 mm
TIRES, WHEELS, AND BALLAST (M6H-101)
WHEEL ADJUSTMENT
132
M6S-111,M6L-111,M6H-101
Summary of Contents for M6H-101
