Kubota K008-5, Operating Instructions Manual

Page: 117 / 168

Operation
W9215-8135-1
115
06/2021
Registering a black key for the machine
1. Remove the RH swing cover (1).
2. Remove the coupler cap (2) for key register.
3. Connect the coupler for key register and the wire harness (op-
tional: P/N: RA058-9661-0).
Register a black key only under the following conditions:
Make sure that there are no persons within the machine's danger area. It is essential to warn persons
in the vicinity of the machine by briefly honking the horn.
Make sure that all operational controls are in the neutral position.
Starting the excavator is only allowed when the operator is sitting on the operator's seat.
Do not allow the engine to run indoors, unless the room is equipped with an exhaust gas extraction
system or otherwise well ventilated. The exhaust gas contains carbon monoxide, a colourless, odour-
less, and lethal gas.
STOP