6-S16
GR1600EC2, WSM
ELECTRICAL SYSTEM
Regulation Voltage
CAUTION
• To avoid personal injury, do not touch the rotating or hot
parts while the engine is running.
NOTE
■
• Before performing this checking, make sure that the no-load
dynamo output is proper.
• Complete the charging circuit with fully charged battery.
1. Rum the engine at the rated speed.
2. Keeping the coupler (2) of regulator being connected, measure
the voltage with a volt meter (5) across the terminal blue (a) and
terminal blue (c). (Refer to figure (A).)
3. If the measurement is not within the specified value, replace the
wire harness between the dynamo (4) and regulator (1).
4. If the measurement is within the specified value, measure the
voltage with a volt meter (6) across the terminal red (f) and
chassis. (Refer to figure (B).)
5. If the measurement is not within specified value, replace the
regulator (1).
W1015722
(11) Lighting System
Head Light Switch Continuity
1. Disconnect the wiring leads from head light switch and remove it.
2. Measure the resistance with an ohmmeter across the head light
switch terminals in each position.
3. If the resistance differs from the factory specifications, the head
light switch is faulty.
W1019964
Voltage
Terminal blue (a) -
Terminal blue (c)
AC 20 V or more
Terminal blue (f) -
Chassis
DC 14 to 15 V
(1) Regulator
(2) Coupler
(3) Battery
(4) Dynamo
(5) Volt Meter (AC)
(6) Volt Meter (DC)
a : Terminal Blue
b : Terminal Black
c : Terminal Blue
d : Terminal Green
e : Terminal Yellow
f : Terminal Red
Resistance
Factory
spec.
OFF
Infinity
ON
0
Ω
(1) Head Light Switch
KiSC issued 07, 2006 A
Summary of Contents for GR1600EC2
