ENGLISH
13
4.8.1 Preassembling the kickstarter shaft
– Mount the kickstarter shaft
8
in a vise with the teeth of the ratchet gear down
(use protective jaws).
– Mount the kickstarter gear
9
with the teeth for the ratchtet gear showing down-
wards.
– Mount disk
bk
and circlip
bl
with the sharp edge facing up.
– Slide disk
bm
onto the kickstarter shaft.
– Oil o-ring
bn
and mount it into the groove of the kickstarter shaft.
4.9 Centrifugal clutch, primary drive
C
LUTCH HUB
Check the locking devices of the chain joints
1
for tight fit.
C
LUTCH SHOES
Check the thickness of the clutch linings. Check the clutch shoe bolts
2
for tight fit.
C
LUTCH DRUM
Check the running surface
3
of the clutch drum for grooves and signs of wear.
Check the primary gear
4
for breakage and signs of wear.
Check the bronze bushing
5
for grooves and signs of wear.
4.10 Exchanging the clutch shoes
– Unhook the two clutch springs
6
.
– Remove the locking devices
7
and take off both chain joints.
– Take the clutch shoes off the clutch hub.
– Slightly grease the bolts of the chain joints and use them to fix the new clutch
shoes in their position.
N
OTE
: T
HE TWO LOCKING DEVICES OF THE CHAIN JOINTS MUST BE MOUNTED IN SUCH A WAY
THAT THE OPEN SIDE FACES OUTWARDS
.
– Hook the two clutch springs onto the bolts of the clutch shoes.
4
5
3
7
6
6
2
1
8
9
10
11
12
13
8
9
10
11
