ENGLISH
4
– Secure the engine with two screws (M8 x 45) in the engine holder.
3.1 Draining the gear oil
– Remove the gear oil drain plug
1
and the seal ring and drain the gear oil.
3.2 Ignition
– Remove the two retaining springs
2
and lift off the ignition cover.
– Take the rubber
3
out of the opening in the housing.
– Disconnect the spark plug connector from the spark plug.
– Remove the two screws
4
and washers and take off the ignition coil
5
.
– Insert the holding wrench
6
into the two bores of the flywheel and hold the
flywheel.
– Unscrew the hexagon nut of the flywheel.
3.0 DISASSEMBLING THE ENGINE
1
2
2
3
4
4
5
6
