KTM 890 Duke R US 2020 Page 57 Operator'S Manual Download

Page: 57 / 317

CONTROLS 6

6.14

Foot brake lever

402177-10

Foot brake lever

is located in front of the right footrest.

The rear brake is engaged with the foot brake lever.

6.15

Side stand

402029-10

The side stand

is located on the left of the vehicle.

The side stand is used for parking the motorcycle.

Info

The side stand must be folded up during motorcycle use.
The side stand is coupled with the safety starting system;
follow the riding instructions.

Possible states

• Side stand folded out

–

The vehicle can be supported on the

side stand. The safety starting system is active.

Summary of Contents for 890 Duke R US 2020






























































































































































































































































































































Search results

Summary of Contents for 890 Duke R US 2020

Reviews:

Related manuals for 890 Duke R US 2020

Brands by name

Popular brands

KTM 890 Duke R US 2020, Operator'S Manual

Search results

Summary of Contents for 890 Duke R US 2020

Reviews:

Related manuals for 890 Duke R US 2020

Brands by name

Popular brands