KTM 890 Duke R US 2020 Page 171 Operator'S Manual Download

Page: 171 / 317

SERVICE WORK ON THE CHASSIS 13

169

13.11

Cleaning the chain

Warning

Danger of accidents

Lubricants on the tires reduces the road grip.

–

Remove lubricants from the tires using a suitable cleaning agent.

Warning

Danger of accidents

Oil or grease on the brake discs reduces the braking effect.

–

Always keep the brake discs free of oil and grease.

–

Clean the brake discs with brake cleaner when necessary.

Note

Environmental hazard

Hazardous substances cause environmental damage.

–

Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.

Info

The service life of the chain depends largely on its maintenance.

Preparatory work

–

Raise the motorcycle with the rear lifting gear. (

p. 158)

Summary of Contents for 890 Duke R US 2020






























































































































































































































































































































Search results

Summary of Contents for 890 Duke R US 2020

Reviews:

Related manuals for 890 Duke R US 2020

Brands by name

Popular brands

KTM 890 Duke R US 2020, Operator'S Manual

Search results

Summary of Contents for 890 Duke R US 2020

Reviews:

Related manuals for 890 Duke R US 2020

Brands by name

Popular brands