KTM 890 Duke R US 2020 Page 138 Operator'S Manual Download

Page: 138 / 317

10 RIDING INSTRUCTIONS

136

10.9

Applying the brakes

Warning

Danger of accidents

Moisture and dirt impair the brake system.

–

Brake carefully several times to dry out and remove dirt from the brake linings and the brake discs.

Warning

Danger of accidents

A spongy pressure point on the front or rear brake reduces braking efficiency.

–

Check the brake system and do not continue riding until the problem is eliminated. (Your authorized
KTM workshop will be glad to help.)

Warning

Danger of accidents

The brake system fails in the event of overheating.

If the foot brake lever is not released, the brake linings drag continuously.

–

Take your foot off the foot brake lever when you are not braking.

Warning

Danger of accidents

Higher total weight increases the stopping distance.

–

Take the longer stopping distance into account when carrying a passenger or luggage with you.

Warning

Danger of accidents

Salt on the roads impairs the brake system.

–

Brake carefully several times to remove salt from the brake linings and the brake discs.

Summary of Contents for 890 Duke R US 2020






























































































































































































































































































































Search results

Summary of Contents for 890 Duke R US 2020

Reviews:

Related manuals for 890 Duke R US 2020

Brands by name

Popular brands

KTM 890 Duke R US 2020, Operator'S Manual

Search results

Summary of Contents for 890 Duke R US 2020

Reviews:

Related manuals for 890 Duke R US 2020

Brands by name

Popular brands