MAINTENANCE WORK ON CHASSIS AND ENGINE
95
Warning
Danger of accidents
Reduced braking efficiency due to use of non-approved brake linings.
–
Brake linings available from accessory suppliers are often not tested and approved for use on KTM vehicles. The construction
and friction factor of the brake linings and therefore the brake power can differ considerably from the original KTM brake lin-
ings. If brake linings are used that differ from the originals, there is no guarantee that they comply with the original license.
The vehicle no longer corresponds to the condition at delivery, and the warranty is no longer valid.
–
Check the brake discs. (
100845-11
–
Position the brake calipers. Mount screws
spacers
but do not tighten.
400421-12
–
Insert brake linings
. Position springs
and install bolts
.
Info
The spring hanger of the springs
must be positioned facing upwards.
–
Operate the hand brake lever repeatedly until the brake linings lie on the brake disc and
there is a pressure point. Fix the hand brake lever in the activated position.
The brake caliper straightens.
–
Tighten screw
.
Summary of Contents for 690 SMC USA 2010
