MAINTENANCE WORK ON CHASSIS AND ENGINE
72
Info
Before changing the spring preload, make a note of the present setting, e.g., by measuring the length of the spring.
–
Remove the shock absorber.
x
–
After removing the shock absorber, clean it thoroughly.
700541-01
–
Loosen locking ring
.
–
Turn adjusting ring
until the spring is no longer under tension.
Hook wrench (T106S)
–
Measure the overall spring length without a load.
–
Tension the spring by turning the adjusting ring
to the prescribed value.
Guideline
Spring preload
18 mm (0.71 in)
–
Tighten locking ring
.
–
Install the shock absorber.
x
9.16
Bleeding the fork legs
–
Lean the motorcycle on the side stand.
Summary of Contents for 690 SMC USA 2010
