KTM 690 SMC USA 2010, Owner'S Manual, Page: 168 / 196

STORAGE
166
Info
Do not use non-porous materials since they prevent humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Since the engine cannot warm up properly, the water vapor produced during
combustion condenses and causes valves and exhaust system to rust.
14.2
Putting into operation after storage
–
Take the front from the work stand. ( p. 62)
–
Take the rear from the work stand. ( p. 63)
–
Recharge the battery. x ( p. 118)
–
Install the battery.
x
( p. 117)
–
Set the clock. ( p. 35)
–
Refuel. ( p. 56)
–
Carry out checks before putting into operation. ( p. 48)
–
Make a test ride.