KTM 690 SMC USA 2010, Owner'S Manual

Page: 134 / 196

MAINTENANCE WORK ON CHASSIS AND ENGINE
132
100160-10
–
Remove the screw from the rear of the flasher housing.
–
Tilt headlamp diffuser

forward carefully and take it off.
–
Press the flasher bulb carefully into the socket, turn it counterclockwise by about 30°,
and take it out of the socket.
Info
Do not touch the reflector with your fingers, and keep it free from grease.
–
Press the new flasher bulb carefully into the socket and turn it clockwise until it stops.
Flasher light (RY10W / socket BAU15s) ( p. 173)
–
Position the diffuser.
–
Insert the screw and turn it counterclockwise first until it engages in the thread. Tighten
the screw slightly.
–
Check the flasher system function.
9.67
Checking the headlight setting
0 0 A A
0 0 B B
400726-10
–
Stand the vehicle upright on a horizontal surface in front of a light wall and make a
mark at the height of the center of the low beam headlight.
–
Make another mark at a distance

under the first mark.
Guideline
Distance

5 cm (2 in)
–
Position the vehicle vertically at a distance

in front of the wall.
Guideline
Distance

5 m (16 ft)
–
Check the headlight setting.