KTM 690 SMC USA 2010, Owner'S Manual, Page: 47 / 196

GENERAL TIPS AND HINTS ON PUTTING INTO OPERATION
45
Info
When using your vehicle, remember that others may feel disturbed by excessive noise.
–
Make sure that the pre-delivery inspection work has been carried out by an authorized KTM workshop.
You receive a delivery certificate and the service record at vehicle handover.
–
Before your first trip, read the entire operating instructions carefully.
–
Get to know the controls.
–
Adjust the basic position of clutch lever. ( p. 142)
–
Adjust the basic position of hand brake lever. ( p. 87)
–
Adjust the basic position of the foot brake lever.
x
( p. 97)
–
Get used to handling the vehicle on a suitable piece of land before making a longer trip. Try also to ride as slowly as possible and in a
standing position to get a better feeling for the vehicle.
–
Hold the handlebar firmly with both hands and keep your feet on the footrests when riding.
–
Run the engine in.
6.2
Running in the engine
–
During the running-in phase, do not exceed the specified engine speed and engine performance.
Guideline
Maximum engine speed
During the first: 1,000 km (621.4 mi) 6,000 rpm
After the first: 1,000 km (621.4 mi) 7,800 rpm
–
Avoid fully opening the throttle!