KTM 690 SMC USA 2010, Owner'S Manual, Page: 119 / 196

MAINTENANCE WORK ON CHASSIS AND ENGINE
117
100277-10
–
Disconnect the negative (minus) cable of the battery.
–
Pull off the plug connector

upwards.
–
Remove screws

.
–
Pull the retaining bracket

of the battery forward and remove it.
–
Take off the positive pole cover

.
–
Disconnect the positive (plus) cable of the battery.
–
Push the wiring harness to the side and pull the battery out of the battery rack.
Info
Never operate the motorcycle with a discharged battery or without a battery. In
both cases, electrical components and safety devices can be damaged. The vehi-
cle is therefore no longer roadworthy.
9.56
Installing the battery
x
100277-11
–
Slide the battery into the battery rack.
Info
The battery terminals must be at the rear.
–
Attach the positive cable and mount positive terminal cover

.
–
Position retaining bracket

.
–
Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Plug in connector

.
–
Attach the minus cable .
–
Mount the seat. ( p. 116)