KTM 50 SX 2020, Owner'S Manual

Page: 48 / 141

11 SERVICE WORK ON THE CHASSIS
46
11.9 Removing the lower triple clamp
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 41)
–
Remove the front wheel. ( p. 87)
–
Remove the fork legs. ( p. 44)
–
Remove the start number plate. ( p. 53)
–
Remove front fender. ( p. 54)
V00272-10
Main work
–
Pull fuel tank breather
1
out of the steering stem.
–
Remove nut
2
.
–
Release screw 3 , take off the upper triple clamp with the
handlebar and set aside.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
V00273-10
–
Remove protective ring
4
.
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
11.10 Installing the lower triple clamp
601602-10
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease ( p. 132)
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing
1
.
–
Check whether upper steering head seal
2
is correctly posi-
tioned.
–
Push on protective ring
3
.