KTM 50 SX 2020, Owner'S Manual

Page: 62 / 141

11 SERVICE WORK ON THE CHASSIS
60
700514-01
Main work
–
Remove screws with toothed washers
1
from the silencer
cap
2
.
–
Remove end cap and outer tube
3
.
–
Remove glass fiber yarn filling
4
from the inner tube.
–
Clean the parts that need to be reinstalled and check for dam-
age.
–
Mount the new glass fiber yarn filling on the inner tube.
–
Slide the outer tube over the glass fiber yarn filling.
–
Insert the end cap into the outer tube.
–
Mount and tighten the screws with the toothed washers.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
Finishing work
–
Install the main silencer. ( p. 59)
11.30 Removing the engine sprocket cover
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 41)
H01437-10
Main work
(50 SX)
–
Remove screws
1
.
–
Remove screw
2
.
–
Take off the engine sprocket cover.
H01436-10
(50 SX Mini)
–
Remove screws
1
.
–
Remove screw
2
.
–
Take off the engine sprocket cover.