KTM 50 SX 2020, Owner'S Manual

Page: 63 / 141

SERVICE WORK ON THE CHASSIS 11
61
11.31 Installing the engine sprocket cover
H01437-10
Main work
(50 SX)
–
Position the engine sprocket cover. Mount screws
1
, but
do not tighten yet.
–
Mount and tighten screw
2
.
Guideline
Screw, engine
sprocket cover M8 12 Nm (8.9 lbf ft)
–
Tighten screws 1 .
Guideline
Screw, engine
sprocket cover M6 10 Nm (7.4 lbf ft)
H01436-10
(50 SX Mini)
–
Position the engine sprocket cover. Mount screws
1
, but
do not tighten yet.
–
Mount and tighten screw
2
.
Guideline
Screw, engine
sprocket cover M8 12 Nm (8.9 lbf ft)
–
Tighten screws
1
.
Guideline
Screw, engine
sprocket cover M6 10 Nm (7.4 lbf ft)
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 41)
11.32 Checking the chain for dirt
400678-01
–
Check the chain for coarse dirt accumulation.
» If the chain is very dirty:
–
Clean the chain. ( p. 62)