KTM 50 SX 2020, Owner'S Manual

Page: 55 / 141

SERVICE WORK ON THE CHASSIS 11
53
R00530-11
–
Position the fuel tank.
–
Make sure that no cables or throttle cables are trapped or dam-
aged.
–
Mount and tighten screw
2
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
–
Position the fuel tank breather in the steering stem.
Finishing work
–
Mount the seat. ( p. 57)
11.16 Removing the start number plate
H01425-10
–
Remove screw
1
.
–
Unhook the start number plate from the brake line and remove
it.
11.17 Installing the start number plate
H01426-10
–
Attach the start number plate to the brake line.
–
Position the start number plate.
Holding lugs
1
engage in the fender.
H01427-10
–
Mount and tighten screw
2
.
Guideline
Screw, start number
plate M6 4 Nm (3 lbf ft)