MAINTENANCE WORK ON CHASSIS AND ENGINE
62
100808-10
–
Remove locking split pins
, withdraw bolt
, and take out the brake pads.
–
Clean brake caliper and brake caliper support.
100407-10
–
Check that anti-squeal shim
in the brake caliper and anti-rattle shim
in the
brake caliper support are seated correctly.
100408-01
–
Fit the brake pads, insert the bolt, and mount the locking split pins.
–
Operate the foot brake lever repeatedly until the brake linings lie on the brake disc
and there is a noticeable pressure point.
400233-10
–
Correct the brake fluid reservoir level to the marking
.
Brake fluid DOT 4 / DOT 5.1 (
p. 108)
–
Mount the screw cap
with the membrane
and the O-ring.
Info
Clean up overflowed or spilt brake fluid immediately with water.
9.65
Removing front wheel
x
–
Jack up the motorcycle. (
p. 36)
100809-01
–
Press the brake caliper by hand on to the brake disc in order to press back the
brake pistons.
Info
Make sure when pushing back the brake pistons that you do not press the
brake caliper against the spokes.
500084-10
–
Remove screw
.
–
Loosen screw
.
Summary of Contents for 450 XC-W SIX DAYS USA 2010
Page 2: ......
Page 103: ...101...
Page 106: ...WIRING DIAGRAM 104 ye Yellow ye bl Yellow black ye re Yellow red...
Page 107: ...WIRING DIAGRAM 105...
