CONTROLS
14
5.15
Tripmaster switch
(Option: Tripmaster switch)
You can use the trip master switch to control the functions of the speedometer from the handlebar.
Info
The trip master is an optional accessory.
5.16
Setting kilometers or miles
Info
If you change the unit, the value
ODO
is retained and converted accordingly.
The values
TR1
,
TR2
,
A1
,
A2
and
S1
are cleared when the unit of measure is changed.
Condition
The motorcycle is stationary.
400329-01
–
Press the button
briefly and repeatedly until
H
appears at the bottom right of the
display.
–
Press the button
for 3 - 5 seconds.
The setup menu is displayed and the active functions shown.
–
Press the button
repeatedly until the
Km/h
/
Mph
display flashes.
Km/h adjusting
–
Press the button .
Mph adjusting
–
Press the button .
–
Press the button
for 3 - 5 seconds.
The settings are stored and the setup menu closed.
Info
If no button is actuated for 20 seconds or there is no signal from the wheel
speed sensor, then the settings are automatically stored and the setup menu
closed.
5.17
Setting the clock
Condition
The motorcycle is stationary.
400330-01
–
Press the button
briefly and repeatedly until
CLK
appears at the bottom right of
the display.
–
Press the button
for 3 - 5 seconds.
The hour display flashes.
–
Set the hour display with the button
and/or button .
–
Press the button
briefly.
The next segment of the display flashes and can be set.
–
You can set the following segments in the same way as the hours by pressing
the button
and the button .
Info
The seconds can only be set to zero.
–
Press the button
for 3 - 5 seconds.
The settings are saved and the Setup menu closed.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu closed.
Summary of Contents for 450 XC-W SIX DAYS USA 2010
Page 2: ......
Page 103: ...101...
Page 106: ...WIRING DIAGRAM 104 ye Yellow ye bl Yellow black ye re Yellow red...
Page 107: ...WIRING DIAGRAM 105...
