KTM 450 XC-W SIX DAYS USA 2010 Page 29 Owner'S Manual Download

Page: 29 / 118

GENERAL TIPS AND HINTS ON PUTTING INTO OPERATION

600870-01

–

Fit a waterproofing device on the air filter.

Waterproofing device for air filter (59006021000)

Info

See the

KTM PowerParts

fitting instructions.

–

Adjust the carburetor jetting and settings.

Info

Your authorized KTM workshop has the recommended carburetor tuning set-
tings.

600868-01

–

Clean the chain.

Chain cleaner (

p. 110)

–

Fit the steel sprocket.

Tip

Do not grease the chain.

–

Clean radiator fins.

–

Straighten bent radiator fins carefully.

6.6

Preparing for riding on wet and muddy surfaces

–

Seal the air filter box.

Tip

Seal the air filter box along the edges to prevent the ingress of dirt.

–

Clean the air filter.

(

p. 75)

Info

Check the air filter approx. every 30 minutes.

600870-01

–

Fit a waterproofing device on the air filter.

Waterproofing device for air filter (59006021000)

Info

See the

KTM PowerParts

fitting instructions.

–

Adjust the carburetor jetting and settings.

Info

Your authorized KTM workshop has the recommended carburetor tuning set-
tings.

600868-01

–

Fit the steel sprocket.

–

Clean the motorcycle. (

p. 88)

–

Straighten bent radiator fins carefully.

Summary of Contents for 450 XC-W SIX DAYS USA 2010























































































































Search results

Summary of Contents for 450 XC-W SIX DAYS USA 2010

Reviews:

Related manuals for 450 XC-W SIX DAYS USA 2010

Brands by name

Popular brands

KTM 450 XC-W SIX DAYS USA 2010, Owner'S Manual

Search results

Summary of Contents for 450 XC-W SIX DAYS USA 2010

Reviews:

Related manuals for 450 XC-W SIX DAYS USA 2010

Brands by name

Popular brands