KTM 450 XC-W SIX DAYS USA 2010, Owner'S Manual

Page: 48 / 118

MAINTENANCE WORK ON CHASSIS AND ENGINE
46
9.28
Removing the fork protector
x
–
Remove the fork legs.
x
( p. 44)
600878-10
–
Remove screws

on the left fork leg. Remove the fork protector upwards.
–
Remove the screws on the right fork leg. Remove the fork protector upwards.
9.29
Installing the fork protector
x
600878-10
–
Position the fork protection on the left fork leg. Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Install the fork legs.
x
( p. 45)
9.30
Removing the front fender
600692-10
–
Remove screws

. Remove the front fender.
–
Pay attention to the location of the distance bushings.
9.31
Installing the front fender
600692-10
–
Ensure that the spacing sleeves are mounted in the fender.
–
Position the front fender. Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Info
Take care with the contact between the holding lugs and the start number
plate or headlight mask.
9.32
Removing headlight mask with headlight (all EXC models, all 450/530 XC-W models)
600703-10
–
Switch off all electrical equipment.
–
Remove screw

and take off clamp.
–
Loosen the rubber band

. Push up the headlight mask and swing it forwards.