16
TUNING THE ENGINE
92
16.8
Adjusting the basic position of the shift lever
401950-12
–
Remove screw
1
with washers and take off shift lever
2
.
401951-10
–
Clean gear teeth
A
of the shift lever and shift shaft.
–
Mount the shift lever on the shift shaft in the required position and engage the
gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle compo-
nents during the shift procedure.
–
Mount and tighten screw
1
with the washers.
Guideline
Screw, shift lever
M6
14 Nm
(10.3 lbf ft)
Loctite
®
243™
