6
CONTROLS
13
6.6
Combination switch
H01181-10
The combination switch is fitted on the left side of the handlebar.
Possible states
1
STANDARD
–
STANDARD mapping is activated when LED
1
lights up.
1TC
STANDARD with TC
–
STANDARD mapping with traction control is acti-
vated when LED
1
and
TC
light up.
2
ADVANCED
–
ADVANCED mapping is activated, when LED
2
lights up.
2TC
ADVANCED with TC
–
ADVANCED mapping with traction control is acti-
vated when LED
2
and
TC
light up.
The engine characteristic can be changed using button
MAP
on the combination
switch.
The
Launch Control
and the traction control can also be activated via the combination
switch.
6.7
Overview of indicator lamps
S01196-10
Possible states
Malfunction indicator lamp lights up/flashes orange
–
The OBD has
detected an emission- or safety-critical fault.
Malfunction indicator lamp flashes orange rapidly
–
The
Launch Con-
trol
is activated.
(XC
‑
F US)
The low fuel warning lamp lights up orange
–
The fuel level has
reached the reserve mark.
6.8
Service hour counter
S01257-10
Service hour counter
1
is fitted in front of the handlebar.
It shows the total number of service hours of the engine.
The service hour counter begins counting when the engine is started and stops when
the engine is switched off.
Info
The value indicated by the service hour counter cannot be cleared or adjusted.
6.9
Opening the filler cap
Danger
Fire hazard
Fuel is highly flammable.
The fuel in the fuel tank expands when warm and can escape if overfilled.
–
Do not refuel the vehicle in the vicinity of open flames or lit cigarettes.
–
Switch off the engine for refueling.
–
Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
–
If any fuel is spilled, wipe it off immediately.
–
Observe the specifications for refueling.
