KTM 450 SX-F 2017, Owner'S Manual

Page: 86 / 125

14 ELECTRICAL SYSTEM
84
F00136-10
Main work
(All SX
‑
F standard models)
–
Pull starter relay
1
from the holder.
F00135-10
–
Take off protection caps
2
.
–
Remove faulty main fuse
3
.
Info
You can recognize a defective fuse by a burned-out fuse wire
A
.
A spare fuse
4
is located in the starter relay.
–
Install a new main fuse.
Fuse (58011109110) ( p. 106)
–
Check that the electrical equipment is functioning properly.
Tip
Insert a spare fuse so that it is available if needed.
–
Mount the protection caps.
–
Mount the starter relay onto the holder and route the cable.
F00161-10
(XC
‑
F US, SX
‑
F Factory Edition)
–
Pull starter relay
1
from the holder.
F00162-10
–
Take off protection caps 2 .
–
Remove faulty main fuse 3 .
Info
You can recognize a defective fuse by a burned-out fuse wire
A
.
A spare fuse
4
is located in the starter relay.
–
Install a new main fuse.
Fuse (58011109110) ( p. 106)
–
Check that the electrical equipment is functioning properly.
Tip
Insert a spare fuse so that it is available if needed.
–
Mount the protection caps.
–
Mount the starter relay onto the holder and route the cable.
Finishing work
–
Mount the seat. ( p. 50)