10
TUNING THE CHASSIS
38
Guideline
Rebound damping (SX
‑
F EU)
Comfort
20 clicks
Standard
17 clicks
Sport
14 clicks
Rebound damping (SX
‑
F US)
Comfort
20 clicks
Standard
17 clicks
Sport
12 clicks
Rebound damping (XC
‑
F US)
Comfort
15 clicks
Standard
12 clicks
Sport
10 clicks
Rebound damping (SX
‑
F Factory Edition)
Comfort
17 clicks
Standard
12 clicks
Sport
7 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
–
Mount protection cap
1
.
10.16
Handlebar position
H01188-10
The holes on the handlebar supports are placed at a distance of
A
from the center.
Hole distance A
3.5 mm (0.138 in)
The handlebar can be mounted in 2 different positions. In this way, the handlebar can
be mounted in the most comfortable position for the rider.
10.17
Adjusting the handlebar position
Preparatory work
–
Remove the handlebar cushion.
H01189-10
Main work
–
Remove screws
1
. Remove the handlebar clamp. Remove the handlebar and lay it
to one side.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
Remove screws
2
. Take off handlebar supports
3
.
–
Position rubber bushings
4
and push through nuts
5
from below.
–
Place the handlebar supports in the required position.
Info
The handlebar supports are longer and higher on one side.
Position the left and right handlebar supports evenly.
–
Mount and tighten screws
2
.
Guideline
Screw, handlebar support
M10
40 Nm
(29.5 lbf ft)
Loctite
®
243™
