KTM 450 SX-F 2017, Owner'S Manual, Page: 61 / 125

11 SERVICE WORK ON THE CHASSIS
59
V00293-11
–
Plug in connector
3
for the fuel pump.
–
Remove the wash cap set. Thoroughly clean the plug-in connection of the fuel
line using compressed air.
Info
Under no circumstances should dirt enter into the fuel line. Dirt in the
fuel line clogs the injection valve!
–
Lubricate the O-ring and connect plug-in connection
4
for the fuel line.
Info
Route the cable and fuel line at a safe distance from the exhaust sys-
tem.
S01248-11
(XC
‑
F US)
–
Mount and tighten screw
2
with the rubber bushing.
Guideline
Remaining screws, chassis M6 10 Nm
(7.4 lbf ft)
V00316-11
–
Plug in connector
3
for the fuel pump.
–
Remove the wash cap set. Thoroughly clean the plug-in connection of the fuel
line using compressed air.
Info
Under no circumstances should dirt enter into the fuel line. Dirt in the
fuel line clogs the injection valve!
–
Lubricate the O-ring and connect plug-in connection 4 for the fuel line.
Info
Route the cable and fuel line at a safe distance from the exhaust sys-
tem.
Finishing work
–
Mount the seat. ( p. 50)
11.34 Checking for chain dirt accumulation
400678-01
–
Check the chain for coarse dirt accumulation.
» If the chain is very dirty:
–
Clean the chain. ( p. 59)
11.35 Cleaning the chain
Warning
Danger of accidents Oil or grease on the tires reduces the road grip.
–
Remove the lubricant from the tires using a suitable cleaning agent.
Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.