KTM 350 EXC-F 2017, Owner'S Manual

Page: 94 / 129

15 ELECTRICAL SYSTEM
92
V00469-11
–
Position the headlight mask and fix it with rubber bands

.
The holding lugs engage in the fender.
–
Position the brake line and wiring harness in the brake line guide.
Finishing work
–
Check the headlight setting. ( p. 93)
15.8 Changing the headlight bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
Preparatory work
–
Remove the headlight mask with the headlight. ( p. 91)
E00358-11
Main work
–
Turn protection cap  together with the underlying bulb socket counterclockwise
all the way and remove it.
–
Pull bulb socket

of the parking light out of the reflector.
E00359-10
–
Pull out headlight bulb

.
–
Insert the new headlight bulb.
Headlight (HS1 / socket PX43t) ( p. 114)
–
Insert the protection cap with the bulb socket into the reflector and turn it clock-
wise all the way.
Info
Ensure that O-ring

is seated properly.
–
Insert the bulb socket of the parking light into the reflector.
Finishing work
–
Install the headlight mask with the headlight. ( p. 91)
–
Check the headlight setting. ( p. 93)
15.9 Changing the turn signal bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.