11
TUNING THE CHASSIS
49
11.15
Adjusting the handlebar position
Warning
Danger of accidents
A repaired handlebar poses a safety risk.
If the handlebar is bent or straightened, the material becomes fatigued. The handlebar may break as a result.
–
Change the handlebar if the handlebar is damaged or bent.
M00993-11
–
Remove screws
. Take off the handlebar clamps. Remove the handlebar and lay
it to one side.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
Remove screws
. Take off the handlebar supports.
–
Place the handlebar supports in the required position. Mount and tighten
screws
.
Guideline
Screw, handlebar holder
M10
40 Nm
(29.5 lbf ft)
Loctite
®
243™
Info
Position the left and right handlebar supports evenly.
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned correctly.
–
Position the handlebar clamps. Mount screws
and tighten evenly.
Guideline
Screw, handlebar clamp
M8
20 Nm
(14.8 lbf ft)
Info
Make sure the gap widths are even.
Summary of Contents for 350 EXC-F 2017
Page 1: ...OWNER S MANUAL 2017 350 EXC F Art no 3213481en ...
Page 2: ......
