KTM 350 EXC-F 2017, Owner'S Manual

Page: 114 / 129

22 TECHNICAL DATA
112
Screw, crankshaft position sensor M5 6 Nm (4.4 lbf ft) Loctite ® 243™
Screw, gear position sensor M5 5 Nm (3.7 lbf ft)
Loctite
®
243™
Screw, locking lever M5 6 Nm (4.4 lbf ft) Loctite ® 243™
Screw, oil pump cover M5 6 Nm (4.4 lbf ft) Loctite ® 243™
Screw, stator M5 6 Nm (4.4 lbf ft) Loctite ® 243™
Nut, cylinder head M6 10 Nm (7.4 lbf ft) Lubricated with engine oil
Nut, water-pump wheel M6 5 Nm (3.7 lbf ft) Loctite ® 243™
Screw, alternator cover M6 10 Nm (7.4 lbf ft)
–
Screw, clutch cover M6 10 Nm (7.4 lbf ft)
–
Screw, clutch slave cylinder M6 10 Nm (7.4 lbf ft)
–
Screw, engine case M6 10 Nm (7.4 lbf ft)
–
Screw, EVAP connection M6 5 Nm (3.7 lbf ft) Loctite ® 2701™
Screw, EVAP plug M6 10 Nm (7.4 lbf ft) Loctite ® 243™
Screw, exhaust flange M6 10 Nm (7.4 lbf ft) Loctite ® 243™
Screw, oil filter cover M6 10 Nm (7.4 lbf ft)
–
Screw, shift drum locating M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, shift lever M6 14 Nm (10.3 lbf ft) Loctite ® 243™
Screw, starter motor M6 10 Nm (7.4 lbf ft)
–
Screw, timing chain guide rail M6 10 Nm (7.4 lbf ft) Loctite ® 243™
Screw, timing chain securing guide M6 10 Nm (7.4 lbf ft) Loctite ® 243™
Screw, valve cover M6 8 Nm (5.9 lbf ft)
–
Screw, water pump cover M6 10 Nm (7.4 lbf ft)
–
Stud, cylinder head M6 10 Nm (7.4 lbf ft)
–
Screw, auto decompression M7x1 15 Nm (11.1 lbf ft) Loctite ® 243™
Screw, camshaft bearing bridge M7x1 14 Nm (10.3 lbf ft) Lubricated with engine oil
Screw plug, crankshaft location M8 10 Nm (7.4 lbf ft)
–
Screw, timing chain tensioning rail M8 15 Nm (11.1 lbf ft) Loctite ® 243™
Screw, engine sprocket M10 60 Nm (44.3 lbf ft) Loctite ® 2701™
Plug, oil channel M10x1 15 Nm (11.1 lbf ft) Loctite ® 243™
Rotor screw M10x1 70 Nm (51.6 lbf ft) Thread, oiled with engine
oil/cone degreased
Screw plug, cam lever axis M10x1 10 Nm (7.4 lbf ft)
–
Screw, unlocking of timing chain ten-
sioner M10x1 8 Nm (5.9 lbf ft)
–
Spark plug M10x1 10… 12 Nm (7.4…
8.9 lbf ft)
–
Coolant temperature sensor M10x1.25 12 Nm (8.9 lbf ft)
–
Nut, cylinder head M10x1.25 Tightening sequence:
Tighten diagonally.
1st tightening stage
10 Nm (7.4 lbf ft)
2nd tightening stage
30 Nm (22.1 lbf ft)
3rd tightening stage
50 Nm (36.9 lbf ft) Thread, oiled with engine
oil/cone greased
Stud, cylinder head M10x1.25 20 Nm (14.8 lbf ft) Loctite ® 243™
Oil drain plug with magnet M12x1.5 20 Nm (14.8 lbf ft)
–
Plug, oil pressure regulator valve M12x1.5 20 Nm (14.8 lbf ft)
–
Oil drain plug M14x1.5 15 Nm (11.1 lbf ft)
–
Nut, inner clutch hub M18x1.5 100 Nm (73.8 lbf ft) Loctite ® 243™
Nut, primary gear M18LHx1.5 100 Nm (73.8 lbf ft) Loctite ® 243™
Screw plug, oil screen M20x1.5 15 Nm (11.1 lbf ft)
–
Plug, timing chain tensioner M24x1.5 40 Nm (29.5 lbf ft)
–
Screw, alternator cover M24x1.5 18 Nm (13.3 lbf ft)
–