12
SERVICE WORK ON THE CHASSIS
54
K00548-11
–
Position the upper triple clamp with the handlebar.
–
Mount screw
but do not tighten yet.
–
Secure wiring harness and clutch line with cable holder.
–
Position the voltage regulator, and mount and tighten screws
.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)
H01672-10
–
Position the fork legs.
Bleeder screws
are positioned toward the front.
Info
Grooves are milled into the side of the upper end of the fork legs. The sec-
ond milled groove (from the top) must be flush with the top edge of the
upper triple clamp.
V00464-10
–
Tighten screws
.
Guideline
Screw, bottom triple clamp
M8
15 Nm
(11.1 lbf ft)
V00465-11
–
Tighten screw
.
Guideline
Screw, top steering head
M20x1.5
12 Nm (8.9 lbf ft)
V00465-10
–
Tighten screw
.
Guideline
Screw, top steering stem
M8
20 Nm
(14.8 lbf ft)
V00464-11
–
Tighten screws
.
Guideline
Screw, top triple clamp
M8
20 Nm
(14.8 lbf ft)
–
Secure the wiring harness with cable holder
.
Summary of Contents for 350 EXC-F 2017
Page 1: ...OWNER S MANUAL 2017 350 EXC F Art no 3213481en ...
Page 2: ......
