KTM 250 EXC-F 2018, Setup Instructions

Page: 6 / 48

2 SETUP
4
E00850-10
Condition
Packaging V12
–
Remove the box and the plastic packaging.
Info
An assistant prevents the motorcycle from falling
over.
To avoid damaging the motorcycle during the setup,
leave the protective film on the vehicle until you
have finished.
–
Remove and unpack the separate enclosure and attach-
ments. Check that the scope of supply is complete using
the enclosed packing list.
–
Remove the two cable ties on the triple clamp.
–
Have a lift stand available.
Lift stand (78129955100)
402051-01
–
Together with an assistant, take the vehicle off the pallet.
–
Position the vehicle on a lift stand.
–
Check the vehicle and attachments for transport damage.
–
Install the shock absorber. ( p. 22)
H01768-10
–
Position the turn signal indicator lamp
1
in the
speedometer bracket.
402736-10
–
Position the connector retainer and speedometer on the
upper triple clamp.
–
Mount and tighten screws
2
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
–
Route the clutch line with the clutch master cylinder
toward the front between the upper and lower triple
clamps.
–
Install the fork legs. ( p. 23)