KTM 250 EXC-F 2018, Setup Instructions

Page: 20 / 48

2 SETUP
18
F01080-10
–
Press the spring with special tool
bs
.
Pliers for footrest spring (79029083000)
The special tool is applied to area
I
on the footrest.
–
Mount pin
cl
.
F01081-10
–
Mount the washer and split pin
cm
.
F01079-10
–
Position the frame protectors on both sides.
–
Mount and tighten screws cn .
Guideline
Screw, frame protector M5 3 Nm (2.2 lbf ft)
–
Mount and tighten screws
co
with the washers.
Guideline
Screw, frame protector M5 3 Nm (2.2 lbf ft)
–
Mount the cable tie(s).
(EXC
‑
F AU, EXC
‑
F Six Days)
–
Install the engine guard. ( p. 37)
–
Unpack and mount the KTM PowerParts included in the deliv-
ery (optional).
Info
Read the accompanying KTM PowerParts fitting instruc-
tions.
–
Apply the sticker included in the delivery (optional).
–
Set kilometers or miles. ( p. 39)
–
Adjust the combination instrument. ( p. 40)
–
Set the clock. ( p. 40)
–
Refuel. ( p. 38)
–
Position all controls in their exact positions on the handlebar.
Tighten all screws.
–
Prepare the vehicle according to the specifications in the
KTM Dealer.net for handover to the customer.
Info
Transport mode must be deactivated to be able to start
the motorcycle.