3 WORK
22
3.6
Adjusting the headlight range
Preparatory work
–
Check the headlight setting. (
V00369-10
Main work
–
Loosen screw
1
.
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on
the lower mark for a motorcycle with driver. The boundary
between light and dark must be exactly on the lower mark-
ing for a motorcycle with rider (attached during checking the
headlight setting).
Info
A change in weight on the vehicle may require a correc-
tion of the headlight range.
–
Tighten screw
1
.
3.7
Installing the shock absorber
V00806-11
Main work
–
Push splash protector
1
to the side and position the shock
absorber. Mount and tighten screw
2
.
Guideline
Screw, top
shock absorber
M12
80 Nm (59 lbf ft)
Loctite
®
2701™
–
Mount and tighten screw
3
.
Guideline
Screw, bottom
shock absorber
M12
80 Nm (59 lbf ft)
Loctite
®
2701™
Info
The heim joint for the shock absorber at the swing arm
is Teflon coated. It must not be greased with grease or
with other lubricants. Lubricants dissolve the Teflon
coating, thereby drastically reducing the service life.
Finishing work
–
Remove the motorcycle from the lift stand. (
