KTM 250 EXC-F 2018, Setup Instructions

Page: 13 / 48

2 SETUP
11
(EXC
‑
F BR)
Warning
Risk of injury Battery acid and battery gases cause
serious chemical burns.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and safety
glasses.
–
Avoid contact with battery acid and battery
gases.
–
Keep sparks or open flames away from the bat-
tery.
–
Only charge batteries in well-ventilated rooms.
–
Rinse the affected area immediately with
plenty of water in the event of contact with the
skin.
–
Rinse eyes with water for at least 15 minutes
and consult a doctor immediately if battery
acid and battery gases get into the eyes.
–
Fill the battery.
Info
Read the notes in the battery package.
–
Recharge the battery. ( p. 30)
(EXC-F US)
–
Install the headlight mask with the headlight. ( p. 20)
–
Install the battery. ( p. 28)
(EXC
‑
F EU/AU/BR, EXC
‑
F Six Days)
–
Remove the fuel tank. ( p. 32)
S01393-10
–
Position turn signal cable harness.
–
Insert the indicator lamp with the black and violet cable
colors into socket
4 .
E00484-10
–
Position turn signal on the headlight mask on both sides,
mount nuts with washers and tighten.
–
Connect the plug-in connector of the right turn signal using
the black and brown cables of the turn signal cable har-
ness.
–
Connect the plug-in connector of the left turn signal using
the violet and brown cable colors of the turn signal cable
harness.