2 SETUP
16
E00496-10
–
Position turn signal on both sides, mount nuts with wash-
ers and tighten.
–
Position license plate lamp on the license plate holder,
and mount and tighten screws
bq
.
–
Mount reflector
br
on license plate holder.
–
Pass cable through the license plate holder.
E00497-10
–
Position license plate holder on the license plate holder.
–
Join the plug-in connector of the license plate lamp.
–
Connect the plug-in connector of the left turn signal which
is marked red.
–
Connect the plug-in connector of the right turn signal
which is marked green.
–
Mount and tighten screws
bo
.
D02151-10
–
Position the right footrest and pin.
Info
Only insert the pin to the extent that the spring can still
be mounted.
S01395-10
–
Position spring as shown.
Spring
D
engages in area
E
.