KTM 1290 SUPERDUKE R, Owner'S Manual

Page: 155 / 213

16 ELECTRICAL SYSTEM
153
–
Check that the turn signal is functioning properly.
–
Position the diffuser.
Info
Insert catch

into recess

.
–
Insert the screw and first turn counterclockwise until it engages in the thread with a
small jerk. Tighten the screw lightly.
16.9 Checking the headlight setting
400726-10
–
Park the vehicle on a horizontal surface in front of a light-colored wall and make a mark
at the height of the center of the low beam headlight.
–
Make another mark at a distance

under the first mark.
Guideline
Distance

5 cm (2 in)
–
Position the vehicle perpendicular to the wall at a distance

from the wall and switch
on the low beam.
Guideline
Distance

5 m (16 ft)
–
The rider, with luggage and passenger if applicable, now mounts the motorcycle.
–
Check the headlight setting.
The light-dark boundary must lie exactly on the lower mark when the motorcycle is
ready to operate with the rider mounted along with any luggage and a passenger if
applicable.
» If the boundary between light and dark does not meet specifications:
–
Adjust the headlight range. ( p. 154)