KTM 1290 SUPERDUKE R Owner'S Manual Download

Page: 96 / 213

SUSPENSION SETTING

12.7

Adjusting the rebound damping of the shock absorber

Caution

Danger of accidents

Disassembly of pressurized parts can lead to injury.

–

The shock absorber is filled with high density nitrogen. Adhere to the description provided. (Your authorized KTM workshop will
be glad to help.)

500315-10

–

Turn adjusting screw



clockwise up to the last perceptible click.

–

Turn counterclockwise by the number of clicks corresponding to the shock absorber
type.
Guideline

Rebound damping

Comfort

15 clicks

Standard

12 clicks

Sport

9 clicks

Full payload

9 clicks

Info

Turn clockwise to increase damping; turn counterclockwise to reduce damping.

12.8

Adjusting the spring preload of the shock absorber

Warning

Danger of accidents

Modifications to the suspension settings can seriously alter the vehicle's ride behavior.

–

Following modifications, ride slowly at first to get the feel of the new ride behavior.

Summary of Contents for 1290 SUPERDUKE R






















































































































































































































Search results

Summary of Contents for 1290 SUPERDUKE R

Reviews:

Related manuals for 1290 SUPERDUKE R

Brands by name

Popular brands

KTM 1290 SUPERDUKE R, Owner'S Manual

Search results

Summary of Contents for 1290 SUPERDUKE R

Reviews:

Related manuals for 1290 SUPERDUKE R

Brands by name

Popular brands